MB95FV100D-101 Datasheet | Fujitsu Semiconductor Limited

DESCRIPTION The MB95160 series is general-purpose, single-chip microcontrollers. In addition to a pact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller. - FEATURE - F2MC-8FX CPU core Instruction set optimized for controllers - Multiplication and division instructions - 16-bit arithmetic operations - Bit test branch instruction - Bit manipulation instructions etc. - Clock - Main clock - Main PLL clock - Sub clock - Sub PLL clock - Timer - 8/16-bit pound timer × 2 channels Can be used to interval timer, PWC timer, PWM timer and input capture. - 8/16-bit PPG × 2 channels - 16-bit PPG × 1 channel - Timebase timer × 1 channel - Watch prescaler × 1 channel - LIN-UART × 1 channel - LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable - Full duplex double buffer (Continued) For the information for microcontroller supports, see the following web site. http://edevice.fujitsu./mi/en-support/ Copyright©2008-2009 FUJITSU MICROELECTRONICS LIMITED All rights reserved 2009.3 .Data Sheet.in MB95160 Series (Continued) - UART/SIO × 1 channel - Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable - Full duplex double buffer - - I2C × 1 channel Built-in wake-up function - External interrupt × 8 channels - Interrupt by edge detection (rising, falling, or both edges can be selected) - Can be used to recover from low-power consumption (standby) modes. - 8/10-bit A/D converter × 8 channels 8-bit or 10-bit resolution can be selected. - LCD controller (LCDC) - 32 SEG × 4 (Max 128 pixels) (Built-in internal division resistance product) - With blinking function - Low-power consumption (standby) mode - Stop...