G685 Datasheet PDF

GMT G685

The G685 has an open-drain output stage, while the G684 have push-pull outputs. The G685L’s open-drain RESET output requires a pull-up resistor that can be connected to a voltage higher than VCC. The G684L have an active-low RESET output, while the G684H has an active-high RESET output.

Part No.	G685
Datasheet	G685 Download
Manufacturer	GMT
Description	Microprocessor Reset IC
Buy	Stock & Price

FEATURES

Precision Monitoring of +3V, +3.3V, and +5V

GENERAL DESCRIPTION

The G684/G685 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost and adjustments when used with +5V, +3.3V, +3.0V- powered circuits. These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, with hysteresis after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are available. The reset comparator is designed to ignore fast transients on VCC, and the outputs are guaranteed to be in the correct logic state for VCC down to 0.8V. Low supply current makes the G684/G685 ideal for use in portable equipment. The G684/G685 are available in 5-pin SOT23-5 packages. Power-Supply Voltages Fully Specified Over Temperature Available in Three Output Configurations Push-Pul...