RA357 Datasheet | Good-Ark Semiconductor

Features Low cost Low leakage Low forward voltage drop High current capability Mechanical Data Copper heat sink Tin-plated slug easy for soldering Encapsulated by UL94V-0 rate (flame retardant) plastic DIM ENSIONS DIM A B C D inches Min. 0.235 0.165 0.380 0.215 Max. 0.250 0.185 0.410 0.225 Min. 6.0 4.2 9.7 5.5 mm Max. 6.4 4.7 10.4 5.7 Note Maximum Ratings and Electrical Characteristicss Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RA351 RA352 RA353 RA354 RA355 RA356 Units Marking colcr Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TC=105 Peak forward surge current 8.3m S single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at 35.0A DC Maximum DC reverse current at rated DC blocking voltage TA=25 @TC=100 VRRM VRMS VDC IO IFSM VF IR R Violet 50 35 50 Brown 100 70 100 Red 200 140 200 Yellow 400 280 400 35.0 400.0 1.2 25.0 500.0 1.0 -65 to +175 Blue 600 420 600 Silver 800 560 800 Gold 1000 700 1000 Volts Volts Volts Amps Amps Volts A /W Typical thermal resistance (Note 1) Operating and storage temperature range Note: (1) Enough heat sink must be considered in application TJ, TSTG RATINGS AND CHARACTERISTIC...