RL253 Datasheet | Good-Ark Semiconductor

RL251 THRU RL257 GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 2.5 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High surge current capability 2.5 ampere operation at TA=75 with no thermal runaway Low reverse leakage Construction utilizes void-free molded plastic technique High temperature soldering guaranteed: 250 /10 seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data Case: R-3 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.021 ounce, 0.60 gram DIM ENSIONS DIM A B C D inches Min. 0.138 0.138 0.040 1.000 Max. 0.161 0.161 0.043 Min. 3.50 3.50 1.00 25.40 mm Max. 4.10 4.10 1.10 Note Maximum Ratings and Electrical Characteristics Symbols RL251 @25 unless otherwise specified RL254 RL255 RL256 RL257 Units RL252 Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward current at TA=75 Peak forward surge current 8.3m S single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) Maximum instantaneous forward voltage at IFM=2.5A, TA=25 (Note 2) Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 VRRM VRMS VDC I(AV) IFSM VF IR CJ R 50 35 50 100 70 100 200 140 200 400 280 400 2.5 150.0 1.0 5.0 50.0 35.0 35 -65 to +175 600 420 600 800 560 800 1000 700 1000 Volts Volts Volts Amps Amps Volts A F /W Typical junction capacitance (Note 1) Typical thermal resistance Operating and storage temperature range Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (2) Pulse test: pulse width 300u Sec, Duty cycle 1% TJ, TSTG RATINGS AND CHARACTERISTIC CURVES RATINGS AND CHARACTERISTIC...