3.0SMCJ7.0A Datasheet | Good-Ark Semiconductor

Features - 3000 W peak pulse power capability with a 10/1000 µs waveform - Excellent clamping capability - Fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum Solder dip 275°C, 10s - ponent in accordance to Ro HS 2002/95/EC and WEEE 2002/96/EC Applications For use in sensitive electronics protection against voltage transients induced by lightning or inductive load switching. Key applications include protection of I/O interfaces, industrial and LED lighting applications, DC power buses, and other vulnerable circuits used in consumer electronics. DO-214AB(SMC) For bi-directional devices, use suffix C or CA (e.g.3.0SMCJ7.0CA). Electrical characteristics apply in both directions. Mechancial Data Case: DO-214AB (SMC) Molding pound meets UL 94 V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 Marking: Laser marking band denotes cathode end or device code; Unidirectional-Device Code and Cathode Band; Bidirectional-Device Code Only Absolute Maximum Ratings (TA=25°C unless otherwise specified) Parameter Peak pulse power dissipation with a 10/1000 µs waveform (1) (Fig. 3) Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Peak forward surge current 8.3 ms single half sine-wave (2) Power dissipation on infinite heatsink at TL = 75 °C (Fig. 6) Maximum instantaneous forward voltage at 100A (2) Typical Thermal Resistance junction to case Operating junction and storage temperature range Symbol PPPM IPPM IFSM PD VF RθJC TJ, TSTG Value 3000 See Next Table 250 6.0 3.5 49 - 65 to + 175 Unit W A A W V °C/W °C Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum 1/6 3.0SMCJ7.0 thru 3.0SMCJ170CA Transient Voltage Suppressors Peak Pulse Power 3000W Stand-off Voltage 7V to 170V Electrical Characteristics (TA=25°C...