SCT500D - Twin SMD Ceramic PTC Thermistor

GOOD-ARK

Download the SCT500D datasheet PDF. This datasheet also covers the SCT500D-GOOD variant, as both devices belong to the same twin smd ceramic ptc thermistor family and are provided as variant models within a single manufacturer datasheet.

Key Features

Very small footprint, allowing to increase the number of lines per PCB.
Matched pairs in one component, significantly reducing the assembly time.
Limited height and weight, used on high speed pick-and-place circuit assembly.
Flat pick-up ceramic area for easy placement.
Smaller ceramics for faster response time.
Thermal coupled PTC’s for enhanced protection.
Four spaced terminations for heat flow regulation and improved mechanical s.

📥 Download Datasheet

SCT500D twin smd ceramic ptc thermistor by GOOD-ARK - Datasheet Preview — Note: The manufacturer provides a single datasheet file (SCT500D-GOOD-ARK.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	SCT500D
Manufacturer	GOOD-ARK
File Size	345.56 KB
Description	Twin SMD Ceramic PTC Thermistor
Datasheet	SCT500D Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
SCT50N120	1200V 65A Silicon carbide Power MOSFET	STMicroelectronics
SCT51240	4-A Single Channel High Speed Low Side Driver	SCT
SCT53600	Ideal Diode Controller	SCT
SCT-013-000	Transformer	XiDi Technology
SCT-013-000V	Split core current transformer	YHDC

Other Datasheets by GOOD-ARK

Part Number	Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

SCT500D Twin SMD Ceramic PTC Thermistor Desciption The component consists of two high-performance ceramic PTCs mounted in a lead-frame for (SMD) direct soldering onto a printed-circuit board (PCB) or substrate. The ceramic PTCs are soldered to the lead frame by a reflow process, during which the solder layer is melted to the metallized ceramic surface using a low residue flux. This structure can hold the low matched resistance in a loop. The component in accordance to RoHS.