GT2113 - CMOS POSITIVE VOLTAGE REGULATOR

GTM

General Description

voltage, making them ideal for battery applications.

The space-saving SOT-26 package is attractive for “Pocket” and “Hand Held” applications.

Key Features

Very Low Dropout Voltage.
Guaranteed 300mA output.
Over-Temperature Shutdown.
Current Limiting.
Short Circuit Current Fold-back.
Typical Accurate± 1.5%.
Noise Reduction Bypass Capacitor.
Power-saving Shutdown Mode.
Power Good Detector.
Factory Pre-set Output Voltages.
Low Temperature coefficient.

📥 Download Datasheet

GT2113 cmos positive voltage regulator by GTM - Datasheet Preview

Datasheet Details

Part number	GT2113
Manufacturer	GTM
File Size	516.86 KB
Description	CMOS POSITIVE VOLTAGE REGULATOR
Datasheet	GT2113 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
GT2181	Power Audio Transistor	Musitech
GT20D101	Silicon N-Channel Transistor	Toshiba Semiconductor
GT20D201	Silicon P-Channel Transistor	Toshiba Semiconductor
GT20G101	Silicon N-Channel IGBT	Toshiba Semiconductor
GT20G101SM	Silicon N-Channel IGBT	Toshiba Semiconductor

Other Datasheets by GTM

Part Number	Description
GT2123	CMOS POSITIVE VOLTAGE REGULATOR
GT2133	CMOS POSITIVE VOLTAGE REGULATOR
GT2153	CMOS POSITIVE VOLTAGE REGULATOR
GT2530	N AND P-CHANNEL ENHANCEMENT MODE POWER MOSFET
GT2531	N AND P-CHANNEL ENHANCEMENT MODE POWER MOSFET

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

ISSUED DATE :2006/04/18 REVISED DATE : G T 2 11 3 300m A CMO S Po si ti ve Vo ltag e Regu l ato r Description The GT2113 series of positive, linear regulators feature low quiescent current (30 A typ.) with low dropout voltage, making them ideal for battery applications. The space-saving SOT-26 package is attractive for “Pocket” and “Hand Held” applications. This rugged device has both Thermal Shutdown, and Current Fold-back to prevent device failure under the “Worst” of operating conditions. An additional feature is a “Power Good” detector, which pulls low when the output is out of regulation. In applications requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and ground. The GT2113 is stable with an output capacitance of 2.2 F or greater.