Datasheet4U Logo Datasheet4U.com

PD60CNK18BPT - Fibre Optic Sensor Contrast Sensor

General Description

The PD60CNK18BP ..

is a fibre optic amplifier made specifically for plastic fibres to detect contrast.

Key Features

  • manual distance setup by keyboard. NO or NC (light or dark mode) output is selectable by wiring. The sensor output is built as a Push-pull output that performs both a NPN and a PNP output, which are fully protected against short-circuit, transients and wrong polarity. The sensor is built in a strong 13 x 30 x 60 mm polycarbonate housing for DIN-rail mounting. Ordering Key Type Housing style Housing size Housing material Not used Plastic fibres Sensing distance mm Output type Output configuratio.

📥 Download Datasheet

Datasheet Details

Part number PD60CNK18BPT
Manufacturer Garlo Gavazzi
File Size 150.72 KB
Description Fibre Optic Sensor Contrast Sensor
Datasheet download datasheet PD60CNK18BPT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PD600BA N-Channel MOSFET UNIKC
PD6010 Power Tilt Switch COMUS
PD6012 DIODE MODULE Nihon Inter
PD6016 DIODE MODULE Nihon Inter
PD606BA N-Channel MOSFET UNIKC

Other Datasheets by Garlo Gavazzi

Part Number Description
PD60CNK18BP Fibre Optic Sensor Contrast Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Photoelectrics, Fibre Optic Sensor Contrast Sensor Type PD 60 CNK 18 BP .. • Range: 18 mm ±2 mm • Microprocessor controlled and EEPROM parameter storage • Operational voltage 10 - 30 V DC • Output 100 mA, NPN and PNP • Light or dark switching selectable • Cable or M8 standard plug • IP65 protection • cUL and CE approved • Manual contrast set-up Product Description The PD60CNK18BP .. is a fibre optic amplifier made specifically for plastic fibres to detect contrast. The sensor is microprocessor-based and features manual distance setup by keyboard. NO or NC (light or dark mode) output is selectable by wiring. The sensor output is built as a Push-pull output that performs both a NPN and a PNP output, which are fully protected against short-circuit, transients and wrong polarity.