9440 Datasheet | General Electric Company

DESCRIPTION GE Structured Products INDUSTRIAL TYPICAL PROPERTY VALUES- Property PHYSICAL Specific Gravity Light Transmission (Average), 1/8" disk Water Absorption, Equilibrium, 24 hrs @ 73°F @ 212°F MECHANICAL Tensile Strength @ Yield Ultimate Tensile Modulus Flexural Strength Flexural Modulus pressive Strength pressive Modulus Elongation Izod Impact Strength Notched @ 1/8" Unnotched @ 1/8" THERMAL Coefficient of Thermal Expansion Thermal Conductivity Heat Deflection Temperature @ 264 psi @ 66 psi Test Method ASTM D792 ASTM D1003 ASTM D570 Units — % % Value 1.20 88 0.15 0.35 0.58 ASTM D638 ASTM D638 ASTM D790 ASTM D790 ASTM D695 ASTM D695 ASTM D638 ASTM D256A psi psi psi psi psi psi % ft-lbs/in 9,000 9,500 345,000 13,500 345,000 12,500 345,000 110 12–16 60 (no failure) 3.75 x 10-5 1.35 270 280 ASTM D696 ASTM C177 ASTM D648 in/in/°F Btu/hr•ft 2•°F•in °F LEXAN is a registered trademark of General Electric pany - These are typical properties and are not intended for specification purposes. If minimum certifiable properties are required, please contact your local GE Plastics Structured Products representative or the GE Plastics Structured Products Quality Services Department. DISCLAIMER: THE MATERIALS AND PRODUCTS OF THE BUSINESSES MAKING UP THE GE PLASTICS UNIT OF GENERAL ELECTRIC PANY, ITS SUBSIDIARIES AND AFFILIATES, (“GEP”) ARE SOLD SUBJECT TO GEP’S STANDARD CONDITIONS OF SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT, PRINTED ON THE BACK OF ORDER ACKNOWLEDGMENTS AND INVOICES, AND AVAILABLE UPON REQUEST. ALTHOUGH ANY INFORMATION, REMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN IN GOOD FAITH, GEP MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING GEP MATERIALS, PRODUCTS, REMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN GEP’S STANDARD CONDITIONS OF SALE, GEP AND ITS...