BYM12-300 Datasheet | General Semiconductor

FEATURES D2 D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) 0 D2 = D1 + - 0.008 (0.20) - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - Capable of meeting environmental standards of MIL-S-19500 - For surface mount applications - High temperature metallurgically bonded construction - Glass passivated cavity-free junction - Fast switching for high efficiency - High temperature soldering guaranteed: 450°C/5 seconds at terminals. plete device submersible temperature of 260°C for 10 seconds in solder bath MECHANICAL DATA Case: JEDEC DO-213AB molded plastic over glass body Terminals: Plated terminals, solderable per MIL-STD-750, Method 2026 Polarity: Two bands indicate cathode end -1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Mounting Position: Any Weight: 0.116 ounce, 0.0046 gram Dimensions in inches and (millimeters) - Glass-plastic encapsulation is covered by Patent No. 3,996,602 and brazed-lead assembly to Patent No. 3,930,306 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS BYM12 -50 EGL41A BYM12 -100 EGL41B BYM12 -150 EGL41C BYM12 -200 EGL41D BYM12 -300 EGL41F BYM12 -400 EGL41G UNITS Fast efficient device: 1st band is green Polarity color bands (2cnd band) Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TT=75°C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Maximum thermal resistance (NOTE 3) (NOTE 4) GRAY PINK ORANGE BROWN...