BZW04-70 Datasheet | General Semiconductor

FEATURES - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 - Glass passivated chip junction - 400W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% - Excellent clamping capability - Low incremental surge resistance - Fast response time: typically less than 1.0 ps from 0 Volts to V(BR) for unidirectional and 5.0ns for bi-directional types - Typical ID less than 1µA above 10V rating - High temperature soldering guaranteed: 265°C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160 (4.1) 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. NOTE: Lead diameter is 0.026 (0.66) MECHANICAL DATA 0.023 (0.58) for suffix "E" part numbers Dimensions are in inches and (millimeters) Case: JEDEC DO-204AL molded plastic over passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: For unidirectional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Mounting Position: Any Weight: 0.012 ounce, 0.3 gram DEVICES FOR BIDIRECTIONAL APPLICATIONS For bi-directional use add suffix Letter "B" (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOL VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTE 1, FIG. 1) PPPM IPPM PM(AV) Minimum 400 SEE TABLE 1 Watts Amps Watts Peak pulse current with a 10/1000µs waveform (NOTE 1) Steady state power dissipation at TL=75°C lead lengths, 0.375” (9.5mm) (NOTE 2) Peak forward surge current, 8.3ms single half Sine-wave superimposed on rated load (JEDEC Method) (NOTE 3) unidirectional only (NOTE 4) IFSM Amps Maximum instantaneous forward voltage at 25A uni-directional only Operating junction and storage temperature range VF TJ,...