DG1 Datasheet | General

FEATURES 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. - Specially designed for clamping circuits horizontal deflection systems and damper applications - High temperature metallurgically bonded construction - Glass passivated cavity-free junction - 1.5 Ampere operation at TA=50°C with no thermal runaway - Typical IR less than 0.1µA - Hermetically sealed package - Capable of meeting environmental standards of MIL-S-19500 - High temperature soldering guaranteed: 350°C/10 seconds 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Dimensions in inches and (millimeters) - Brazed-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO-204AP Solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS CG1 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=50°C Peak forward surge current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=100°C VRRM VRMS VDC I(AV) IFSM VF IR IR(AV) trr CJ RΘJA TJ, TSTG 1400 980 1400 1.5 40.0 1.1 5.0 100 50.0 15.0 15.0 55.0 -65 to +175 1500 1050 1500 Volts Volts Volts Amps Amps Volts µA µA Maximum full load reverse current full cycle average 0.375” (9.5mm) lead length at TA=100°C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range µs p F °C/W °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=50m A (2)...