GigaDevice GD25B127D
The GD25B127D (128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2, and I/O3. The Dual I/O data is transferred with speed of 208Mbits/s and the Quad I/O & Quad output data is transferred with speed of 416Mbits/s. DEVICE OPERATION GD25B127D SPI Mode Standard SPI The GD25B127D features a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).| Part No. | GD25B127D |
|---|---|
| Datasheet | GD25B127D Download |
| Manufacturer |  GigaDevice |
| Description | Dual and Quad Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25B127D● 128M-bit Serial Flash - 16384K-byte - 256 bytes per programmable page
● Standard, Dual, Quad SPI - Standard SPI: SCLK, CS#, SI, SO - Dual SPI: SCLK, CS#, IO0, IO1 - Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
● High Speed Clock Frequency - 104MHz for Standard and Dual SPI fast read with 30PF load - Dual I/O Data transfer up to 208Mbits/s - Quad I/O Data transfer up to 416Mbits/s
● Fast Program/Erase Speed - Page Program time: 0.5ms typical - Sector Erase time: 50ms typical - Block Erase time: 0.16/0.3s typical - Chip Erase time: 50s typical
● Flexible Architecture - Uniform Sector of 4K-byte - Uniform Block of 32/64K-byte
● Low Power Consumption - 20uA typical stand-by current - 1uA typical deep-power-down current
● Software Protection - Write protect all/portion of memory via software
● Allows XIP (execute in place) Operation - Continuous Read With 8/16/32/64-byte Wrap
● Minimum 100,000 Program/Erase Cycles
● Data Retention - 20-year data retention typical
● Single Po...
