GigaDevice GD25B32C
The GD25B32C (32M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2, and I/O3. The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s. DEVICE OPERATION GD25B32C SPI Mode Standard SPI The GD25B32C features a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).| Part No. | GD25B32C |
|---|---|
| Datasheet | GD25B32C Download |
| Manufacturer |  GigaDevice |
| Description | Dual and Quad Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25B32C● 32M-bit Serial Flash -4096K-byte -256 bytes per programmable page
● Standard, Dual, Quad SPI -Standard SPI: SCLK, CS#, SI, SO -Dual SPI: SCLK, CS#, IO0, IO1 -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
● High Speed Clock Frequency -120MHz for fast read with 30PF load -Dual I/O Data transfer up to 240Mbits/s -Quad I/O Data transfer up to 480Mbits/s -Continuous Read With 8/16/32/64-byte Wrap
● Software Write Protection -Write protect all/portion of memory via software -Top or Bottom, Sector or Block selection
● Program/Erase Speed -Page Program time: 0.6ms typical -Sector Erase time: 50ms typical -Block Erase time: 0.15/0.25s typical -Chip Erase time: 15s typical
● Flexible Architecture -Sector of 4K-byte -Block of 32/64K-byte
● Low Power Consumption -1μA typical stand-by active current -1μA typical power down current
● Advanced Security
FEATURES
-128-bit Unique ID for each device -3*1024-Byte Security Registers With OTP Locks -Discoverable parameters (SFDP) register● Cy...
