GigaDevice GD25LD80E
The GD25LD80E (8M-bit) Serial NOR flash supports the standard Serial Peripheral Interface (SPI), and the Dual Output: Serial Clock, Chip Select, Serial Data I/O0 (SI) and I/O1 (SO). The Dual Output data is transferred with speed of 100Mbit/s. GD25LD80E-Rev1.1 6 September 2024 Uniform Sector Standard and Dual Serial Flash BLOCK DIAGRAM GD25LD80E WP# Write Control Logic SCLK CS# SI(IO0) SO(IO1) SPI Command & Control Logic Write Protect Logic and Row Decode Status Register High Voltage Generators Flash Memory Page Address Latch/Counter...| Part No. | GD25LD80E |
|---|---|
| Datasheet | GD25LD80E Download |
| Manufacturer |  GigaDevice |
| Description | Standard and Dual Serial Flash |
| Buy | Stock & Price |
FEATURES
● 8M-bit Serial NOR Flash - 1024K-Byte - 256 Bytes per programmable page● Standard, Dual Output - Standard SPI: SCLK, CS#, SI, SO, WP# - Dual Output: SCLK, CS#, IO0, IO1, WP#
● High Speed Clock Frequency - 50MHz for fast read - Dual Output Data transfer up to 100Mbits/s
● Software/Hardware Write Protection - Write protect all/portion of memory via software - Enable/Disable protection with WP# Pin - Top/Bottom Block protection
● Endurance and Data Retention - Minimum 100,000 Program/Erase Cycles - 20-year data retention typical
● Fast Program/Erase Speed - Page Program time: 1.4ms typical - Sector Erase time: 120ms typical - Block Erase time: 0.4s/0.6s typical - Chip Erase time: 8s typical
● Flexible Architecture - Uniform Sector of 4K-Byte - Uniform Block of 32/64K-Byte
● Low Power Consumption - 0.1μA typical standby current - 0.1μA typical deep power down current
● Advanced Security
FEATURES
- 128-bit Unique ID for each device - 512-Byte Security Registers With OTP Locks● S...
