GigaDevice GD25LQ128D
The GD25LQ128D (128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual/Quad SPI and QPI mode: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s. DEVICE OPERATION GD25LQ128D SPI Mode Standard SPI The GD25LQ128D features a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).| Part No. | GD25LQ128D |
|---|---|
| Datasheet | GD25LQ128D Download |
| Manufacturer |  GigaDevice |
| Description | Dual and Quad Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25LQ128D● 128M-bit Serial Flash -16384K-byte -256 bytes per programmable page
● Standard, Dual, Quad SPI, QPI -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# -Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 -QPI: SCLK, CS#, IO0, IO1, IO2, IO3
● High Speed Clock Frequency -120MHz for fast read with 30PF load -Dual I/O Data transfer up to 240Mbits/s -Quad I/O Data transfer up to 480Mbits/s -QPI Mode Data transfer up to 480Mbits/s
● Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin -Top/Bottom Block protection
● Allows XIP (execute in place) Operation -Continuous Read With 8/16/32/64-byte Wrap
● Minimum 100,000 Program/Erase Cycles
● Fast Program/Erase Speed -Page Program time: 0.5ms typical -Sector Erase time: 70ms typical -Block Erase time: 0.16/0.3s typical -Chip Erase time: 50s typical
● Flexible Architecture -Uniform Sector of 4K-byte -Uniform Block of 32/64K-byte -E...
