GigaDevice GD25Q41B
The GD25Q41B Serial flash supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). DEVICE OPERATION GD25Q41B SPI Mode Standard SPI The GD25Q41B feature a serial peripheral interface on 4 signals bus: Serial Clock (SCLK), Chip Select (CS#), Serial Data Input (SI) and Serial Data Output (SO).| Part No. | GD25Q41B |
|---|---|
| Datasheet | GD25Q41B Download |
| Manufacturer |  GigaDevice |
| Description | Uniform sector Dual and Quad Serial Flash |
| Buy | Stock & Price |
FEATURES
GD25Q41B● 4M-bit Serial Flash -512K-byte -256 bytes per programmable page
● Standard, Dual, Quad SPI -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD# -Dual SPI:SCLK, CS#, IO0, IO1, WP#, HOLD# -Quad SPI:SCLK, CS#, IO0, IO1, IO2, IO3
● High Speed Clock Frequency -104MHz for fast read with 30PF load -Dual I/O Data transfer up to 208Mbits/s -Quad I/O Data transfer up to 416Mbits/s
● Program/Erase Speed -Page Program time:0.35ms typical -Sector Erase time:50ms typical -Block Erase time: 0.18/0.25s typical -Chip Erase time:1.5 s typical
● Flexible Architecture -Sector of 4K-byte -Block of 32/64K-byte
● Low Power Consumption -20mA maximum active current -5uA maximum power down current
● Software/Hardware Write Protection -Write protect all/portion of memory via software -Enable/Disable protection with WP# Pin -Top or Bottom, Sector or Block selection
● Single Power Supply Voltage -Full voltage range:2.7~3.6V
● Minimum 100,000 Program/Erase Cycles
● Advanced security
FEATURES
-Power Supp...
