Datasheet4U Logo Datasheet4U.com

GL2595L - 2A STEP-DOWN VOLTAGE SWITCHING REGULATORS

General Description

The GL2595L series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor.

It saves board space.

The external shutdown function can be controlled by logic level and then come into standby mode.

Key Features

  • include a guaranteed ±4% tolerance on output voltage und.

📥 Download Datasheet

Datasheet Details

Part number GL2595L
Manufacturer Gleam
File Size 350.02 KB
Description 2A STEP-DOWN VOLTAGE SWITCHING REGULATORS
Datasheet download datasheet GL2595L Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GL25-00 IN-LINE HIGH CURRENT SILICON BRIDGE RECTIFIERS TRSYS
GL25-01 IN-LINE HIGH CURRENT SILICON BRIDGE RECTIFIERS TRSYS
GL25-02 IN-LINE HIGH CURRENT SILICON BRIDGE RECTIFIERS TRSYS
GL25-04 IN-LINE HIGH CURRENT SILICON BRIDGE RECTIFIERS TRSYS
GL25-06 IN-LINE HIGH CURRENT SILICON BRIDGE RECTIFIERS TRSYS

Other Datasheets by Gleam

Part Number Description
GL2595 2A STEP-DOWN VOLTAGE REGULATOR
GL2594 1.5A STEP-DOWN VOLTAGE REGULATOR
GL2596 3A STEP-DOWN VOLTAGE REGULATOR
GL2574A 1.5A STEP-DOWN VOLTAGE SWITCHING REGULATORS
GL2575 2A STEP-DOWN VOLTAGE SWITCHING REGULATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Gleam Power Management GL2595L 2A STEP-DOWN VOLTAGE SWITCHING REGULATORS Description The GL2595L series are monolithic IC designed for a stepdown DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control have good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is to prevent over current operating of the output switch. If current limit function occurred and Vfb is down to 0.5V below, the switching frequency will be reduced.