G692
G692 is 4-Pin uP Voltage Monitors manufactured by Global Mixed-mode Technology.
Features
- Precision Monitoring of +3V, +3.3V, and +5V Power-Supply Voltages
- Fully Specified Over Temperature
- Available in Three Output Configurations
Push-Pull RESET Output (G692L) Push-Pull RESET Output (G692H)
Open-Drain RESET Output (G693L)
- 140ms Min Power-On Reset Pulse Width
- 14µA Supply Current
- Guaranteed Reset Valid to VCC = +1V
- Power Supply Transient Immunity
- No External ponents
- Manual Reset Input
- 4-Pin SOT-143 and 5-Pin SC-70 Package
- 2% Threshold Accuracy
Applications
- puters
- Controllers
- Intelligent Instruments
- Critical µP and µC Power Monitoring
- Portable / Battery-Powered Equipment
- Automotive
Ordering Information
ORDER NUMBER
ORDER NUMBER (Pb free)
G692Hxxx TCU
G692Hxxx TCUf
G692Lxxx TCU
G692Lxxx TCUf
G693Lxxx TCU
G693Lxxx TCUf
G692Hxxx TAU
G692Hxxx TAUf
G692Lxxx TAU
G692Lxxx TAUf
G693Lxxx TAU
G693Lxxx TAUf xxx specifies the threshold e.g. 263 denotes voltage the 2.64V threshold voltage.
Pin Configuration
General Description
The G692/G693 are microprocessor (µP) supervisory circuits used to monitor the power supplies in µP and digital systems. They provide excellent circuit reliability and low cost by eliminating external ponents and adjustments when used with +5V, +3.3V, +3.0V- powered circuits. The G692/G693 also provide a debounced manual reset input.
These circuits perform a single function: they assert a reset signal whenever the VCC supply voltage declines below a preset threshold, keeping it asserted for at least 140ms after VCC has risen above the reset threshold. Reset thresholds suitable for operation with a variety of supply voltages are...
