HCD210 Datasheet | Golledge Electronics

OCXO Sine Output Specifications Parameters Frequency range: 5.0 ~ 100.0MHz Ageing per day (at despatch): < ±1x10-8 < ±5x10-9 Frequency stability: < ±5x10-7 per year < ±1x10-7 per 5% change in VDD < ±5x10-10 per 10% change in load Product Option Codes ࡯ ˿ ࡯ ࡯ ࡯ ࡯ ࡯ ࡯ ˿ ࡯ ˿ ࡯ ˿ ࡯ ࡯ ࡯ ࡯ ࡯ ˿ ˿ ࡯ ࡯ ࡯ ࡯ ࡯ ࡯ ࡯ ࡯ ࡯ ˿ ˿ ˿ ࡯ ࡯ ࡯ D A B specify N P R M N A D F A B Optional SMA/B/C/BNC/MCX RF connector 10.00 40.00 Short term stability: < ±5x10-12 over 1 sec (5.0MHz) < ±1x10-11 over 1 sec (10.0MHz) Temperature stability: < ±1x10-7 < ±5x10-8 PIN 50.00 1 2 3 4 5 6 15.90 A A Fixing holes M3 tapped. Penetration 5mm max. 7 8 9 CONNECTION Freq adjust (+ve) Fine adjust Freq adjust (-ve) Isolated RF output Isolated RF output + Supply DO NOT USE - Supply Case Operating temperature range: 0 to +50°C -20 to +60°C -20 to +70°C Storage temperature range: -40 to +90°C Output waveform: Sine wave, 1.5V p-p ±0.5V into 50⏲ Frequency adjustment: ±2x10-6 (typ) over +0.5 to +6.0V (sufficient for 10 years ageing min) Stabilised +6.0V supply provided Mechanical ±5x10-7 Supply voltage (VDD): +12V (±0.5V) +15V (±0.5V) +18V (±0.5V) Power consumption: 4.5W max at switch on 1.0W typ when stabilised at 25°C Warm up: < ±5x10-8 after 10mins at +25°C Phase noise (@ 10.0MHz): < -110 d Bc/Hz @ 10Hz < -130 d Bc/Hz @ 100Hz < -145 d Bc/Hz @ 1k Hz < -150 d Bc/Hz @ 10k Hz < -150 d Bc/Hz @ 50k Hz External connectors: D9 D9 + single SMA D9 + single SMB Other (single SMC/BNC/MCX) Harmonics: Shock: < -30d B wrt carrier IEC 68-2-27 Test Ea 50G for 11ms A 15.90 Mechanical frequency adjustment on this face Scale 1:2 Features « « « « « Frequencies up to 100MHz Internal multiplier above 50.0MHz Single oven & oscillator supply 12V supply standard, 15V or 18V optional Custom options available Vibration: IEC 68-2-06 Test Fc 10-55Hz, 1.5mm. 55-500Hz, 10G ࡯ Standard. ˿ Optional - Please specify required code(s) when ordering Ordering Information Product name + option codes...