ECN1313 Datasheet | HEIDENHAIN

Interface1) Ordering designation Position values/rev Elec. permissible speed/ Deviation2) Calculation time tcal Clock frequency Incremental signals1) Line count- / system accuracy En Dat 2.2 En Dat22 33 554 432 (25  bits)  12 000 min- 1 (for continuous position value)  7 µs  8 MHz - 2048/± 20“ En Dat01 8192 (13 bits)  1 500 min- 1/± 1 LSB  12 000 min- 1/± 50 LSB  9 µs  2 MHz » 1 VPP ECN 1313 Incremental ERN 1387 » 1 VPP - Z1 track3) - - ERN 1321 « TTL - - » 1 VPP 2048/± 20“ « TTL 1024/± 64“ 2048/± 32“ 4096/± 16“ 5000/± 13“ Reference mark Cutoff frequency - 3 d B Scanning frequency Edge separation Electrical connection Via PCB connector Voltage supply Power consumption1) (maximum) Current consumption Stator coupling Shaft Mech. permissible speed n Starting torque Moment of inertia of rotor Permissible axial motion of measured shaft5) Radial runout of the measured shaft Vibration 55 to 2000 Hz Shock 6 ms Operating temperature Protection EN 60 529 Weight - - - - Rotary encoder: 12-pin 12-pin Temperature sensor4): 4-pin 3.6 V to 14 V DC 3.6 V: 600 m W 14 V:  700 m W 5 V: 85 m A (typical, without load) Plane-surface coupling Taper shaft ¬ 9.25 mm; taper 1:10  12 000 min - 1 One  400 k Hz  210 k Hz - - 14-pin 5 V ± 0.25 V - -  300 k Hz  0.35 µs 12-pin 5 V ± 0.5 V -  130 m A (without load)  120 m A (without load)  0.01 Nm (at 20 °C) 2.6 - 10- 6 kgm2 ± 1.5 mm 0.13 mm (static, radial offset ± 0.13 mm)  300 m/s26) (EN 60 068-2-6)  2000 m/s2 (EN 60 068-2-27) - 40 °C to 115 °C IP 40 when mounted Approx. 0.25 kg - 40 °C to 120 °C - Please select when ordering 1) See catalog: Interfaces of HEIDENHAIN Encoders 2) Speed-dependent deviations between the absolute value and incremental signal 3) One sine and one cosine signal per revolution 4) Evaluation optimized for KTY 84-130 5) pensation of mounting tolerances and thermal expansion, no dynamic motion 6) As per standard for room temperature; the following applies for operating temperature Up to 100 °C:  300 m/s2...