HEIDENHAIN ERN1321
The sensor line is connected in the encoder with the corresponding power line.| Part No. | ERN1321 |
|---|---|
| Datasheet | ERN1321 Download |
| Manufacturer | HEIDENHAIN |
| Description | Rotary Encoders |
| Buy | Stock & Price |
Product Information ECN 1313 ECN 1325 ERN 1321 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control October 2013 ECN/ERN 1300 series Rotary Encoders with integral bearings for elevator technology
● Simple installation
● Rigid shaft coupling
● Plane-surface coupling for large mounting tolerances
● Uniform dimensions for various interfaces A = Bearing of mating shaft B = Bearing of encoder k = Required mating dimensions m = Measuring point for operating temperature À = Screw plug, widths A/F 3 and 4, tightening torque 5+0.5 Nm Á = 12-pin PCB connector  = Self-tightening screw M5 x 50 DIN 6912 SW4, tightening torque 5 +0.5 Nm à = M10 back-off thread Å = M6 back-off thread Å = Max. permissible tolerance with moving motor shaft ± 1.5 Æ = Max. permissible static radial offset of motor shaft in indicated direction ± 0.13 mm Ç = Direction of scanning unit motion for output signals in accordance with interface description Absolute ECN 1325 Interface1) Orderin...
● Simple installation
● Rigid shaft coupling
● Plane-surface coupling for large mounting tolerances
● Uniform dimensions for various interfaces A = Bearing of mating shaft B = Bearing of encoder k = Required mating dimensions m = Measuring point for operating temperature À = Screw plug, widths A/F 3 and 4, tightening torque 5+0.5 Nm Á = 12-pin PCB connector  = Self-tightening screw M5 x 50 DIN 6912 SW4, tightening torque 5 +0.5 Nm à = M10 back-off thread Å = M6 back-off thread Å = Max. permissible tolerance with moving motor shaft ± 1.5 Æ = Max. permissible static radial offset of motor shaft in indicated direction ± 0.13 mm Ç = Direction of scanning unit motion for output signals in accordance with interface description Absolute ECN 1325 Interface1) Orderin...
