SS5xx Datasheet | HONEYWELL

FEATURES /BENEFITS - Wide temperature and voltage ranges for design flexibility and harsh (automotive)environments. - Temperature pensated for consistent operation with low-cost magnets (SS500). - SS5 Package is resistant to thermal and mechanical stress. - SS5 profile is lower than other SOT-89 packages. This allows the customer to reduce the total gap. - Industry standard "gull-wing" design. Less susceptibility to "solder bridging". Allows increased circuit board density. - Bipolar, unipolar and latching magnetics. - Low Gauss versions available for high accuracy or wide gap applications. - SS5 package allows 4-pin package designs TYPICAL APPLICATIONS - Brushless DC motors - Digital current sensor - Anti-skid braking sensor - Piston detection in hydraulic cylinder - Valve position sensing - Cam, lever, shaft position sensing - Tachometer, counter pickup - Push-button sensor - Disk speed, tape rotation, flow rate sensing - Speed sensing - rate, under, over speed - Remote reading sensor - Magnetic card reader SS5 Series SS5 Series Hall effect position sensors are operated by the magnetic field from a permanent magnet or electromagnet. The small SOT89 style package surface mounts on PC boards and flexible circuits. The SS5 uses a industry standard "gull-wing" design which makes it less susceptible to "solder bridging" and allows increased circuit board density. The SS5 series package can acmodate larger IC’s than SS1 and allows for fourpin designs The integrated circuits are designed to provide predictable performance over the full temperature range of -40 to +150°C. Bipolar, unipolar and latching magnetics are available. The SS5 has the same footprint and pinout as the industry standard SOT-89. It will replace Honeywell SS1 Series and any equivalent SOT-89 sensors from other suppliers with minimum or no design changes. On-board regulation provides extremely stable operation over the full supply voltage range of 4.5 to 24 VDC(SS51T) or 3.8 to 30 VDC(SS500). Current...