RFM213W Datasheet | HOPERF

Features - Embedded EEPROM y Very Easy Development with RFPDK y All Features Programmable - Frequency Range: 300 to 480 MHz - FSK, GFSK and OOK Demodulation - Symbol Rate: 0.1 to 100 ksps - Sensitivity: -111 d Bm @ 9.6 ksps, FSK, 433.92 MHz - 3-wire SPI Interface for EEPROM Programming - Stand-Alone, No External MCU Control Required - Configurable Duty-Cycle Operation Mode - Supply Voltage: 1.8 to 3.6 V - Low Power Consumption: 4.3 m A @ 433.92 MHz, FSK - Low Sleep Current y 60 n A when Sleep Timer Off y 440 n A when Sleep Timer On - Ro HS pliant - Module Size:32- 11- 5.0mm Descriptions The RFM213W is an ultra low power, high performance, low-cost (G)FSK/OOK stand-alone RF receiver for various 300 to 480 MHz wireless applications. It is part of the CMOSTEK Next Gen RFTM family, which includes a plete line of transmitters, receivers and transceivers. An embedded EEPROM allows the frequency, symbol rate and other features to be programmed into the device using the CMOSTEK USB Programmer and RFPDK. Alternatively, in stock products of 433.92 MHz is available for immediate demands with no need of EEPROM programming. The RFM213W operates from a supply voltage of 1.8 V to 3.6 V, when it is always on, it consumes only 4.3 m A current while achieving -111 d Bm receiving sensitivity. It consumes even less power when working in duty-cycle operation mode via the built-in sleep timer. The device provides demodulated data, power-on reset output as well as a system clock output for use by an external microcontroller or decoder. The RFM213W receiver together with the RFM113 transmitter enables an ultra low cost RF link. Applications - Low-Cost Consumer Electronics Applications - Home and Building Automation - Infrared Receiver Replacements - Industrial Monitoring and Controls - Remote Automated Meter Reading - Remote Lighting Control System - Wireless Alarm and Security Systems - Remote Keyless Entry (RKE)   E‐mail:sales@hoperf.        website://.hoperf.                             ...