RFM66W Datasheet PDF - HOPERF ISM TRANSCEIVER MODULE Specs

RFM66W - ISM TRANSCEIVER MODULE

Datasheet Summary

Description

The RFM66W is a fully integrated ISM band transceiver optimized for use in the (EN 300 220-1) 868 MHz band in Europe and the (FCC Part 15) 915 MHz band in the US with a minimum of external components.

Features

+20 dBm - 100 mW Constant RF output vs. Vsupply.
+14 dBm high efficiency PA.
Programmable bit rate up to 300kbps.
High Sensitivity: down to -123 dBm at 1.2 kbps.
Bullet-proof front end: IIP3 = -12 dBm.
80 dB Blocking Immunity.
Low RX current of 9.3 mA, 100nA register retention.
Fully integrated synthesizer with a resolution of 61 Hz.
FSK, GFSK, MSK, GMSK and OOK modulations.
Built-in Bit Synchronizer performing Clock Recovery.
Sync Word Rec.

Datasheet Details

Part number	RFM66W
Manufacturer	HOPERF
File Size	2.35 MB
Description	ISM TRANSCEIVER MODULE
Datasheet	RFM66W Datasheet
Additional preview pages of the RFM66W datasheet.

📁 Similar Datasheet

RFM6N45 - N-Channel Power MOSFET (Intersil Corporation)

RFM-0505S - DC/DC Converter (RECOM)

RFM-07088 - One Chip FM Receiver (RF)

RFM01 - ISM Band FSK Receiver Module (Hope RF)

RFM10N12 - (RFM10N12/15 / RFM10P12/15) N-CHANNEL ENHANCEMENT-MODE POWER FIELD-EFFECT TRANSISTORS (GE Solid State)

RFM10N15 - (RFM10N12/15 / RFM10P12/15) N-CHANNEL ENHANCEMENT-MODE POWER FIELD-EFFECT TRANSISTORS (GE Solid State)

RFM10N45 - N-Channel Power MOSFET (Intersil Corporation)

RFM10N50 - N-Channel Power MOSFET (Intersil Corporation)

RFM10P12 - (RFM10N12/15 / RFM10P12/15) N-CHANNEL ENHANCEMENT-MODE POWER FIELD-EFFECT TRANSISTORS (GE Solid State)

RFM10P12 - (RFM10P12 / RFM10P15) P-CHANNEL ENHANCEMENT - MODE POWER FIELD-EFFECT TRANSISTORS (GE Solid State)

Full PDF Text Transcription

Click to expand full text

RFM66W RFM66W ISM TRANSCEIVER MODULE v1.0 868 & 915MHz Ultra Low Power High Link Budget Integrated UHF Transceiver GENERAL DESCRIPTION TAL The RFM66W is a fully integrated ISM band transceiver optimized for use in the (EN 300 220-1) 868 MHz band in Europe and the (FCC Part 15) 915 MHz band in the US with a minimum of external components. It offers a combination of high link budget and low current consumption in all operating modes. The 143 dB link budget is achieved by a low noise CMOS receiver front end and up to +20 dBm of transmit output power. A pair of internal power amplifiers are provided permitting either fully regulated - for constant RF performance, or direct supply connection - for optimal efficiency.

Published: Feb 20, 2016 |