Hewlett-Packard VTO-8951
The VTO-8951 provides a fundamental, low jitter source as a key component for the data re-timing in the transmitter subsystem and clock and data recovery in the receiver of the 10 Gb fiber optic systems. The oscillator uses an extremely high performance low noise Agilent Silicon Bipolar transistor in conjunction with a hyperabrupt varactor diode to provide the tuning capability. The oscillator output is then coupled to through a bandpass filter to the output.| Part No. | VTO-8951 |
|---|---|
| Datasheet | VTO-8951 Download |
| Manufacturer |  Hewlett-Packard |
| Description | Voltage Controlled Oscillator |
| Buy | Stock & Price |
FEATURES
● Operating frequency: 9.50 to 11.0 GHz● Output power (50Ω Load): 10 dBm minimum
● Modulation sensitivity: 150 to 250 MHz/V
DESCRIPTION
Functional Block Diagram● Tuning voltage: 0 to 10 Volts
● Low jitter Amp Output
● Frequency drift over 0°C to +75°C: 100 MHz
● 0.5" D x 0.18" H
APPLICATIONS
● Sonet, FEC and 10 Gbits EthernetAPPLICATIONS
● Industry standard package – hermetic using thin film construction VTO-8951ABSOLUTE MAXIMUM RATINGS
[1] Parameter Positive Supply Voltage Tuning Voltage Operating Temperature Storage Temperature Units V V °C °C Ratings 5.2 +15 -10 to +100 -40 to +130 Note: 1. Operation of this device in excess of any of these limits may cause permanent damage. VTO-8951 Summary Characterization, 0°C to 75°C Parameter Frequency Range Vt @ 9.5 GHz Vt @ 11 GHz Power Output ( 50Ω Load @ 8 V) Modulation Sensitivity Modulation Bandwidth Second Harmonic (Below Carrier) Third Harmonic (Below Carrier) Spurious Output (Below Carrier) Phase Noise @ 100 KHz from Fo (B...
