SMAJ4732A Datasheet | HY

FEATURES - For surface mounted application(flat handing surface for Accurate placement) - High Surge Current Rating - Higher Voltages Auailable - Available on Tape and Reel MECHANICAL DATA - Case : JEDEC DO-214AC molded plastic body over passivated chip - Terminals solderable per MIL-STD-750, Method 2026 - Polarity is indicated by cathode band. - Maximum temperature for soldering:260℃ for 10 seconds. - For surface mount application with flame retardent epoxy Meeting UL 94V-0 Note: Products with logo or are made by HY Electronic (Cayman) Limited. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% Dimensions in inches and(millimeters) CHARACTERISTICS Peak Surge Current Maximum Forward Voltage(Note:1) Steady State Power Dissipation at (Note:2,3) Operating Temperature Range Storage Temperature Range SYMBOL Is VF P(AV) TJ TSTG NOTES:1. Forward Current @ 200 m A. 2. Mounted on 4.0mm2 copper pads to each terminal, 3.Lead temperature at 100℃ or less. Derate linearly above 100℃ to zero power at 150℃. VALUE See Table 1 1.2 1.0 -55 to + 150 -55 to + 150 UNIT VOLTS WATTS ℃ ℃ SMAJ47- A-13-99-00/01 Rev.2,21-Apr-2020 SMAJ4728A thru SMAJ4764A PART NUMBER ZENER VOLTAGE Vz TEST CURRENT Izt MAXIMUM DYNAMIC IMPEDANCE Zzt@Izt MAXIMUM REVERSE CURRENT Ir@Vr TEST...