Overview: IMAGE SENSOR CCD multichannel detector head C10150, C10151
Designed for back-thinned CCD area image sensor
C10150 and C10151 are high sensitivity multichannel detector heads for use with back-thinned FFT-CCD area image sensors (S10140/S10141 series) that offer high UV sensitivity and quantum efficiency. C10150 is designed for the non-cooled back-thinned CCD image sensor (S10140 series), while C10151 for the one-stage TE-cooled CCD area image sensors (S10141 series) for detection at even lower light levels. Both C10150 and C10151 incorporate a low-noise driver/amplifier circuit that provides reliable operation from simple external signals. C10151 also includes a highly stable temperature controller that cools the sensor to a preset temperature level (Ts= -10 ˚C) as soon as the power is turned on. If the .. cooler fails and causes internal circuitry to overheat, the built-in protection circuit automatically turns off the power to the thermoelectric cooler. Despite its pact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections to other devices such as monochrometers. The table below shows back-thinned CCD image sensors for C10150 and C10151. C10150 and C10151 do not e with a CCD image sensor, so select the desired sensor and order it separately. Controller for multichannel detector head C7557 is also available. The software supplied with the C7557 allows easy control of the multichannel detector head and data acquisition.
