Handson 17HS4401S
Stepper Motor
| Part No. | 17HS4401S |
|---|---|
| Datasheet | 17HS4401S Download |
| Manufacturer | Handson |
| Description | Stepper Motor |
| Buy | Stock & Price |
Handson Technology Data Specs 17HS4401S 1.7A Torque:43N.cm Stepper Motor A stepper motor to satisfy all your 3D-Printer, robotics, Linear Motion projects needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 1.7A/phase so that it could be driven easily with common motor shield for Arduino (or other motor driver) and a wall adapter or lead-acid battery. The motors are supplied with a 50cm long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print! Brief Data:
● Nema17 Bipolar.
● Number of Phase: 2.
● Step Angle: 1.8°.
● Phase Voltage: 2.6Vdc.
● Phase Current: 1.7A.
● Resistance/Phase: 1.5Ω ±10%.
● Inductance: 2.8mH ±20% (1KHz).
● Number of Wire: 4 (100cm Length).
● Holding Torque: 43Ncm.
● Shaft Diameter: Ø5mm.
● Motor Length: 40mm.
● Rotor Inertia: 54gcm2.
● Temperature rise: 80°C Max.
● Insulation Class: B.
● Dielectric Strength: 500VAC/1-minute.
● Mass: 280g.
● Nema17 Bipolar.
● Number of Phase: 2.
● Step Angle: 1.8°.
● Phase Voltage: 2.6Vdc.
● Phase Current: 1.7A.
● Resistance/Phase: 1.5Ω ±10%.
● Inductance: 2.8mH ±20% (1KHz).
● Number of Wire: 4 (100cm Length).
● Holding Torque: 43Ncm.
● Shaft Diameter: Ø5mm.
● Motor Length: 40mm.
● Rotor Inertia: 54gcm2.
● Temperature rise: 80°C Max.
● Insulation Class: B.
● Dielectric Strength: 500VAC/1-minute.
● Mass: 280g.
