HIP5600 Datasheet | Harris Corporation

HIP5600 Semiconductor WN ITHDRA PART W OBSOLETE SS S PROCE DESIGN N NO EW September 1998 File Number 3270.7 Thermally Protected High Voltage Linear Regulator The HIP5600 is an adjustable 3-terminal positive linear voltage regulator capable of operating up to either 400VDC or 280VRMS. The output voltage is adjustable from 1.2VDC to within 50V of the peak input voltage with two external resistors. This high voltage linear regulator is capable of sourcing 1mA to 30mA with proper heat sinking. The HIP5600 can also provide 40mA peak (typical) for short periods of time. Protection is provided by the on chip thermal shutdown and output current limiting circuitry. The HIP5600 has a unique advantage over other high voltage linear regulators due to its ability to withstand input to output voltages as high as 400V(peak), a condition that could exist under output short circuit conditions. mon linear regulator configurations can be implemented as well as AC/DC conversion and start-up circuits for switch mode power supplies. The HIP5600 requires a minimum output capacitor of 10µF for stability of the output and may require a 0.02µF input decoupling capacitor depending on the source impedance. It also requires a minimum load current of 1mA to maintain output voltage regulation. All protection circuitry remains fully functional even if the adjustment terminal is disconnected. However, if this happens the output voltage will approach the input voltage. Features - Operates from 50VDC to 400VDC - Operates from 50VRMS to 280VRMS Line - UL Recognized - Variable DC Output Voltage 1.2VDC to VIN - 50V - Internal Thermal Shutdown Protection - Internal Over Current Protection - Up to 40mA Peak Output Current - Surge Rated to ±650V; Meets IEEE/ANSI C62.41.1980 with Additional MOV...