PCB1325 Datasheet | Heraeus

Platinum Resistance Temperature Detector PCB 1325 (0805) This platinum temperature sensor on a printed circuit board has been specially designed for use in calorimetry. When designing these sensors, the stringent requirements of this sector with regard to precision, long-term stability, cost minimisation as well as the option for fully automatic further processing were of prime concern. The temperature sensor in an SMD model forms the measurement active element on a PCB. The chip is connected with terminal faces with a thin conductive path in order to reduce heat dissipation and to prevent corruption of the measuring results. As a cable set sensor, it is suitable for a wide range of applications within a temperature range of 0°C to 150°C. Nominal Resistance R0 Tolerance DIN EN 60751 1996-07 Tolerance DIN EN 60751 2009-05 B F 0.3 Ordner No. 30 201 102 Dimensions in mm L1 L2 +1 -2 -0,2 13 15 2,5 FC Type 0805 F 0.3 30 201 103 2,5 0805 Specification Tolerance classes Temperature range Temperature coefficient Long-term stability Measuring current Self-heating Temperature change resistance Contact Soldering Ambient conditions Response time Packaging Storage life Note DIN EN 60751 Class B 0°C to 150°C TC = 3850 ppm/K ≤ 0.1 K after 1000 h at 150°C energized with: Pt 1000: 0.3 m A Pt 500: 0.7 m A 1000Ω: 0.1 to 0.3m A 500Ω: 0.1 to 0.7m A 0.15 K/m W in ice water ≤ 0.1 K after 1000 change 0°C/150°C in air Cu connection pad with chem. Sn surface 1) Chip is soldered lead free 2) Connection pads are ready for lead free...