AMMC-6231 Datasheet | Hewlett-Packard

Features - Wide frequency range: 16 - 32 GHz - High gain: 22 d B - Low 50 Ω Noise Figure: 2.6 d B Chip Size: 1900 x 800 mm (74.8 x 31.5 mils) Chip Size Tolerance: ± 10mm (± 0.4 mils) Chip Thickness: 100 ± 10mm (4 ± 0.4 mils) RF Pad Dimensions: 110 x 90 mm (4.33 x 3.54 mils) DC Pad Dimensions: 100 x 100 mm (3.94 x 3.94 mils) - 50 Ω Input and Output Match - Flat Gain Response - Single 3V Supply Bias Applications - Microwave Radio systems Description Agilent’s AMMC-6231 is a high gain, low-noise amplifier that operates from 16 GHz to 32 GHz. This LNA provides a wide-band solution for system design since it covers several bands, thus, reduces part inventory. The device has input / output match to 50 Ohm, is unconditionally stable and can be used as either primary or sub-sequential low noise gain stage. By eliminating the plex tuning and assembly processes typically required by hybrid (discrete-FET) amplifiers, the AMMC-6231 is a cost-effective alternative in the 16 - 32 GHz munications receivers. The backside of the chip is both RF and DC ground. This helps simplify the assembly process and reduces assembly related performance variations and costs. It is fabricated in a PHEMT. process to provide exceptional noise and gain performance. - Satellite VSAT, DBS Up/Down Link - LMDS & Pt-Pt mm W Long Haul - Broadband Wireless Access (including 802.16 and 802.20 Wi Max) - WLL and MMDS loops - mercial Grade Military Data Shee AMMC-6231 Absolute Maximum Ratings[1] Symbol Vd Vg Id Pin Tch Tstg Tmax Parameters/Conditions Positive Drain Voltage Gate Supply Voltage Drain Current CW Input Power Operating Channel Temp. Storage Case Temp. Maximum Assembly Temp (60 sec max) Units V V m A d Bm °C °C °C Min. Max. 7 NA 100 15 +150 -65 +150 +300 Note: 1. Operation in excess of any one of these conditions may result in permanent damage to this device. Note: These devices are ESD sensitive. The following precautions are strongly remended. Ensure that an ESD approved carrier is used...