AMMC-6440 Datasheet | Hewlett-Packard

Features - Wide frequency range: 37 - 42 GHz - High gain: 14 d B Description The AMMC-6440 MMIC is a broadband 1W power amplifier designed for use in transmitters that operate in various frequency bands between 37GHz and 42GHz. This MMIC optimized for linear operation with an output third order intercept point (OIP3) of 38d Bm. At 42GHz it provides 28d Bm of output power (P1d B) and 14d B of gain. The device has input and output matching circuitry for use in 50 Ω environments. The AMMC-6440 also integrates a Chip Size: 2500 x 1750 mm (100 x 69 mils) Chip Size Tolerance: ± 10mm (±0.4 mils) Chip Thickness: 100 ± 10mm (4 ± 0.4 mils) Pad Dimensions: 100 x 100 mm (4 ± 0.4 mils) - Power: @42 GHz, P-1d B=28 d Bm - Highly linear: OIP3=39d Bm - Integrated RF power detector - 5.5 Volt, -0.7 Volt, 950m A operation Applications - Microwave Radio systems - LMDS & Pt-Pt mm W Long Haul - 802.16 & 802.20 Wi Max BWA - WLL and MMDS loops - mercial grade military - Can be driven by AMMC-6345, increasing overall gain. temperature pensated RF power detection circuit that enables power detection of 0.25V/W. DC bias is simple and the device operates on widely available 5.5V for . current supply (negative voltage only needed for Vg). It is fabricated in a PHEMT process for exceptional power and gain performance. Data Shee AMMC-6440 Absolute Maximum Ratings[1] Symbol Vd Vg Id Pin Tch Tstg Tmax Parameters/Conditions Positive Drain Voltage Gate Supply Voltage Drain Current CW Input Power Operating Channel Temp. Storage Case Temp. Units V V m A d Bm °C °C Min. -3 Max. 7 0.5 1500 23 +150 -65 +150 +300 Maximum Assembly Temp °C (60 sec max) Note: 1. Operation in excess of any one of these conditions may result in permanent damage to this device. Note: These devices are ESD sensitive. The following precautions are strongly remended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling...