HCPL-092J Datasheet | Hewlett-Packard

Agilent HCPL-9000/-0900, -9030/-0930, HCPL-9031/-0931, -900J/-090J, HCPL-901J/-091J, -902J/-092J High Speed Digital Isolators Data Sheet Features - +3.3V and +5V TTL/CMOS patible - 3 ns max. pulse width distortion - 6 ns max. propagation delay skew - 15 ns max. propagation delay Description The HCPL-90xx and HCPL-09xx CMOS digital isolators feature high speed performance and excellent transient immunity specifications. The symmetric magnetic coupling barrier gives these devices a typical pulse width distortion of 2 ns, a typical propagation delay skew of 4 ns and 100 Mbaud data rate, making them the industry’s fastest digital isolators. The single channel digital isolators (HCPL-9000/-0900) Features an active-low logic output enable. The dual channel digital isolators are configured as unidirectional (HCPL-9030/-0930) and bidirectional (HCPL-9031/-0931), operating in full duplex mode making it ideal for digital fieldbus applications. The quad channel digital isolators are configured as unidirectional (HCPL-900J/-090J), two channels in one direction and two channels in opposite direction (HCPL-901J/-091J), and one channel in one direction and three channels in opposite direction (HCPL-902J/-092J). These high channel density make them ideally suited to isolating data conversion devices, parallel buses and peripheral interfaces. They are available in 8-pin PDIP, 8-pin Gull Wing, 8-pin SOIC packages, and 16- pin SOIC narrow-body and wide-body packages. They are specified over the temperature range of -40° C to +100° C. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this ponent to prevent damage and/or degradation, which may be induced by ESD. - High speed: 100 MBd - 15 k V/µs min. mon mode rejection - Tri-state output (HCPL-9000/-0900) - 2500 V RMS isolation - UL1577 and IEC 61010-1 approved Applications - Digital fieldbus isolation - Multiplexed data transmission - puter peripheral interface - High speed digital...