HFBR-53A3VEM Datasheet | Hewlett-Packard

Features - pliant with ANSI X3.297-1996 Fibre Channel Physical Interface FC-PH-2 revision 7.4 proposed specification for 100-M5-SN-I and 100-M6-SN-I signal interfaces - Performance HFBR-53A3VEM/FM: 300 m links in 62.5/125 µm MMF cables 500 m links in 50/125 µm MMF cables - Wave solder and aqueous wash process patible - Industry standard mezzanine height 1 x 9 package style with integral duplex SC connector - IEC 60825-1 Class 1/CDRH Class I laser eye safe - Single +3.3 V power supply operation with PECL patible logic interfaces and TTL Signal Detect Applications - Mass storage systems I/O - puter systems I/O - High-speed peripheral interface - High-speed switching systems - puter systems I/O - Host adapter I/O - RAID cabinets Related Products - Physical layer ICs available for optical or copper interface (HDMP-1636A/1646A) - Versions of this transceiver module also available for +5 V operation (HFBR/HFCT-53D3) - MT-RJ SFF fiber optic transceivers for Fibre Channel (HFBR-HFCT-5910E) - Gigabit Interface Converters (GBIC) for Fibre Channel: HFBR-5602 (SWL) and HFCT-5612 (LWL) Description The HFBR-53A3VEM/FM transceivers from Agilent Technologies allow the system designer to implement a range of solutions for multimode Fibre Channel applications. The overall Agilent transceiver product consists of three sections: the transmitter and receiver optical subassemblies, an electrical subassembly, and the package housing which incorporates a duplex SC connector receptacle. Transmitter Section The transmitter section of the HFBR-53A3VEM/FM consists of an 850 nm Vertical Cavity Surface Emitting Laser (VCSEL) in an Optical Subassembly (OSA), which mates to the fiber cable. The OSA is driven by a custom, silicon bipolar IC which converts differential PECL patible logic signals into an analog laser diode drive current. The high speed output lines are internally ac-coupled and differentially terminate with a 100 Ω resistor. Receiver Section The receiver of the HFBR-53A3VEM/FM...