HLMP-1250 Datasheet | Hewlett-Packard

Features - Low Profile Height - Small T-1 Size Diameter 3.18 mm (0.125 inch) - High Intensity - IC patible - Choice of 3 Bright Colors High Efficiency Red Yellow High Performance Green Description This family of diffused solid state lamps is especially suited for applications where small package size is required without sacrificing luminous intensity. The HLMP-1350 is a red tinted lamp providing a wide viewing angle. The HLMP-1450 and HLMP-1550 are similar products in yellow and green respectively. Package Dimensions Selection Guide Luminous Intensity Iv (mcd) Min. Typ. Max. 1.3 2.3 1.3 2.3 1.4 2.2 1.4 2.2 1.0 3.1 1.0 3.1 1.6 2.8 5.2 Test Condition (m A) 10.0 10.0 10.0 10.0 20.0 20.0 20.0 Typical Viewing Angle[1] (Degrees), Dominant 2Θ1/2 Wavelength[2] 55 626 55 626 55 585 55 585 55 569 55 569 55 569 Part Number HLMP-1350 HLMP-1350-C00xx HLMP-1450 HLMP-1450-B00xx HLMP-1550 HLMP-1550-A00xx HLMP-1550-BC0xx Notes: 1. θ 1/2 is the off-axis angle at which the luminous intensity is half the axial intensity. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part Numbering System HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 01: Tape & Reel, Crimped Leads 02: Tape & Reel, Straight Leads Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Others: Please refer to the Iv Bin Table Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 50: 55 degrees Color Options 3: Ga P HER 4: Ga P Yellow 5: Ga P Green Package Options 1: T-1 (3 mm) Absolute Maximum Ratings Parameter Peak Forward Current Average Forward Current DC Current Reverse Voltage Transient Forward Current (10 µsec Pulse) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] HER 90 25 30 5 500 110 -55 to +100 Yellow 60 20 20 5 500 110 -55 to +100 260°C for 5 Seconds...