HWS443 Datasheet | Hexawave

Features - Low Insertion Loss: 0.35 d B @ 2 GHz - Isolation: 26 d B @ 2 GHz - P1d B: +25 d Bm Typical @ +3V - IP3: 43 d Bm - Low DC Power Consumption - Low Cost SOT-26 Plastic Lead (Pb) Free SOT-26 Package - Lead Free and Ro HS pliant Version of HWS305 Description The HWS443 is a Ga As MMIC SPDT switch in a low cost SOT-26 plastic lead (Pb) free package. The HWS443 features low insertion loss with very low DC power consumption. This general purpose switch can be used in analog and digital wireless munication systems. Electrical Specifications at 25° C with 0, +3V Control Voltages Parameter Insertion Loss Test Conditions DC-1.0 GHz DC-2.5 GHz DC-1.0 GHz DC-2.0 GHz DC-2.5 GHz DC-2.5 GHz 0.5-2.5 GHz @ 0/+3V @ 0/+5V +5 d Bm Per Tone @ 0.5-2.5 GHz @ 0/+3V @ 0/+5V 25 23 20 Min. Typ. 0.30 0.40 28 26 22 20 Max. 0.50 0.60 Unit d B d B d B d B d B d B Isolation Return Loss Input Power for One d B pression 25 30 d Bm d Bm d Bm d Bm ns 50 u A Input Third Order Intermodulation Intercept Point Switching Time Control Current 43 48 50 5 Note: All measurements made in a 50 ohm system with 0/+3V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://.hw..tw All specifications are subject to change without notice. .Data Sheet.in Ga As DC-2.5 GHz SPDT Switch September 2006 V2 Typical Performance Data @ +25° C Insertion Loss vs Frequency 0.0 -0.2 Absolute Maximum Ratings Parameter RF Input Power 0.5-2.5 GHz Control Voltage Absolute Maximum +30 d Bm +6V -40° C to +85°C -65° C to +150° C Insertion Loss(d B) -0.4 -0.6 -0.8 Operating Temperature Storage Temperature Pin Out (Top View) -1.0 0.5 1.0 1.5 2.0 Frequency(GHz) 2.5 3.0 CB RF2 GND 1 2 3 6 5 CA VC2 RFC CB VC1 CA Isolation vs Frequency -10...