IC11S-BD-EJL Datasheet | Hirose

Single Slot SMT Connectors For Card-Bus Based PC Cards IC11S Series PC Card Standard pliant Reduced height : 5.6mm high s Features 1. PC Card Standard pliant: - Grounding is required to meet the high speed signal requrements of the PC card standard. Grounding reliability is achieved with a grounding plate and 8 grounding contacts. - Type 1, type 2 and type 3 cards are covered. - Terminals for ground clipping are provided. Wide variety of options (1)Board Mounting ➀Standard type ➁Reverse type (2)Types of eject button ➀Rigid button ➁Foldering button ➂Pop-up button (3)Position of eject buttons ➀Right ➁Left (4)Standoffs ➀None ➁2.2mm 2. Space saving Smaller size reduces occupied area on PC boards as pared to previous products. 3. Reduced Height: Connector height is minimized to 5.6mm, making possible thinner product designs. 4. Eject mechanism with high-level functionality Hirose Electric's original ejection mechanism provides an higher degree of card ejection over existing products. This improves the operational qualities of card removal. (Patents pending) 5. Wide Variety of Options Available - Standard type mounts to the top of the PC board and reverse type mounts on the underside of the board - Three types of eject buttons; rigid, flexible and POP-UP.All types can be installed on the right or left side of the ejector. - Available with standoff to utilize space under the connector for mounting other parts. 6. Light-weight Weight of 12.7g for normal button type helps achieve the reduced weight required in today’s products. A2 s Product Specifications Current rating Ratings Voltage rating 0.5A 125V AC Operating temperature -55ç to +85ç(Note.1) Storage temperature -40ç to +70ç(Note.2) Operating humidity Relativehumidity 95% max. Storage humidity (With no dew-fall) 40% to 70%(Note.2) Item Specification 500V DC 500V AC 1m A Conditions 1.Insulation resistance 1000M ohms min. 2.Withstanding voltage No flashover or insulation breakdown. 3.Contact...