Datasheet4U Logo Datasheet4U.com

HA16666FP - 600kHz PWM Controlled Switching Regulator

General Description

The HA16666P/FP is a voltage mode PWM (pulse width modulation) control IC for switching regulator control.

It can drive a power MOS FET efficiently on 600 kHz.

Its stanby current is 0.3 mA (max), and it is used as the primary control power supply.

Key Features

  • High-speed switching; tr = 80 ns (15 V amplitude) tf = 40 ns (15 V amplitude).
  • Low power dissipation; 0.3 mA max in standby state 12 mA max in operation state (V IN = 15 V).
  • Dual-slope highly accurate dead-band duty setup circuit; Setup accuracy Du = ±3% (max).
  • Wide output pulse width control range; 0 to 75% HA16666P/FP.
  • Undervoltage lockout protection; VIN high threshold voltage 10 V typ VIN low threshold voltage 8 V typ.
  • Two input thresho.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA16664A PWM Controlled Switching Regulator Hitachi
HA16603FP Contactless Switch Hitachi
HA16603P Contactless Switch Hitachi
HA166132 Read / Write Amplifier for Hard Disk Drive Renesas Technology
HA166134 Read / Write Amplifier for Hard Disk Drive Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HA16666P 600kHz PWM Controlled Switching Regulator
HA16662MP HDD Interface Circuit
HA166008MP (HA166008MP - HA166010MP) READ/ WRITE CIRCUIT
HA166009MP (HA166008MP - HA166010MP) READ/ WRITE CIRCUIT
HA166010MP (HA166008MP - HA166010MP) READ/ WRITE CIRCUIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HA16666P/FP 600kHz PWM Controlled Switching Regulator Description The HA16666P/FP is a voltage mode PWM (pulse width modulation) control IC for switching regulator control. It can drive a power MOS FET efficiently on 600 kHz. Its stanby current is 0.3 mA (max), and it is used as the primary control power supply. Functions • • • • • • • • • +5 V reference voltage circuit Triangular waveform oscillator PWM comparator Output circuit (Totem pole output) Overcurrent protection circuit (with one-pulselatch mode) Undervoltage lockout protectoin circuit Soft start and quick shutdown function Remote control function Comparator with internal 1.3 V reference voltage Features • High-speed switching; tr = 80 ns (15 V amplitude) tf = 40 ns (15 V amplitude) • Low power dissipation; 0.