Datasheet4U Logo Datasheet4U.com

HD151015 - 9 bit Level Shifter/Transceiver With 3 State Outputs

General Description

The HD151015 is an IC which consists of 9 bus transceivers (three state output) in a 24 pin package.

Signals are transmitter from A to B when the direction control input (DiR) is at a high level, and from B to A when DiR is at a low level.

When the enable input ( G) is high, A and B are isolated.

Key Features

  • This product function as level shift transceiver that change VCCA input level to VCCB output level, VCCB input level to VCCA output level by providing different supply voltages to VCCA and VCCB.
  • This product is able to the power management : Turn on and off the supply on VCCB side with providing the supply of VCCA. (Enable input (G) : High level).
  • Inputs and outputs are CMOS level, and the power dissipation is the same as CMOS standard logic.
  • Wide operating.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD151005 Octal Inverter Buffers/Drivers Hitachi
HD151BF854 2.5 V PLL Clock Buffer for DDR Application Renesas Technology
HD151TS302ARP Spread Spectrum Clock Renesas Technology
HD151TS304ARP Spread Spectrum Clock Renesas Technology
HD151TS305RP Spread Spectrum Clock Renesas Technology

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD151011 Dual BCD Programmable Counter with Synchronous Preset Enable
HD151012 8-bit Binary Programmable Counter with Synchronous Preset Enable
HD151TS301RP Clock Generator
HD151TS302RP Spread Spectrum Clock
HD153009 2-7 Code Encoder/Decoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD151015 9 bit Level Shifter/Transceiver With 3 State Outputs ADE-205-039C (Z) 3rd. Edition Jun. 1993 Description The HD151015 is an IC which consists of 9 bus transceivers (three state output) in a 24 pin package. Signals are transmitter from A to B when the direction control input (DiR) is at a high level, and from B to A when DiR is at a low level. When the enable input ( G) is high, A and B are isolated. And this product has two terminals (V CCA, VCCB), VCCA is connected with control input and A bus side, VCCB is connected with B bus side. VCCA and V CCB are isolated. Consequently, it is best to change the level in case of two supply voltage coexist on one board and application of power management.