Datasheet4U Logo Datasheet4U.com

HD66704 - Liquid Crystal Display Controller/Driver

General Description

The HD66704 LCD controller and driver LSI is used to display alphanumeric characters, katakana, hiragana, a variety of symbols, and seven-segment numerals.

It can be connected to a high-performance microcomputer via a high-speed clock-synchronized serial connection or on a four-bit bus.

Key Features

  • Two 16-character lines (5-by-8-dot fonts) and 160 segments.
  • 320 segments with blinking control (at 1/4-duty drive).
  • Wide range of operating voltages  VCC = 1.8 to 5.5 V (LCD drive voltage: VLCD = 3.0 to 6.5 V).
  • Double or triple step-up circuit for LCD drive voltage.
  • 1/2- to 1/5-bias bleeder-resistors and voltage followers for LCD-drive power supply.
  • 25-level electronic potentiometer.
  • High-speed clock-synchronized serial interface (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD66712 Dot-Matrix Liquid Crystal Display Controller/Driver Hitachi
HD66712U Dot-Matrix Liquid Crystal Display Controller/Driver Hitachi
HD66720 Panel Controller/Driver Hitachi
HD66726 Graphics LCD Controller/Driver Hitachi
HD66729 Low-power 105 x 68-dot Graphics LCD Controller/Driver Hitachi

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD66702 Dot-Matrix Liquid Crystal Display Controller/Driver
HD66705U Low-Power Dot-Matrix Liquid Crystal Display Controller/Driver
HD66710 (Dot Matrix Liquid Crystal Display Controller/Driver)
HD66724 (Graphics LCD Controller/Driver with Key Scan Function)
HD66725 (Graphics LCD Controller/Driver with Key Scan Function)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com HD66704 (Graphics LCD Controller/Driver with Two 16-Character Lines and 160 Segments) ADE-207-331(Z) Rev 2.0 June 2001 Description The HD66704 LCD controller and driver LSI is used to display alphanumeric characters, katakana, hiragana, a variety of symbols, and seven-segment numerals. It can be connected to a high-performance microcomputer via a high-speed clock-synchronized serial connection or on a four-bit bus. The HD66704 is capable of displaying two 16-character lines and 160 segments or one 16-character line and 240 segments in its character mode. The HD66704 has 432 built-in fonts for character display and supports double-height display. In its segment mode, it can drive up to 320 segments (at a duty cycle of 1/4).