HD74BC574A Datasheet | Hitachi Semiconductor

Octal D Type Flip Flops With 3 State Outputs ADE-205-042 (Z) Rev. 0 June 1993 Description The HD74BC574A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process. The device Features low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight edge triger D type flip flops with three state outputs in a 20 pin package. Data at the D inputs meeting set up requirements, are transferred to the Q outputs on positive going transitions of the clock input. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the strage elements. Features - - - - Input/Output are at high impedance state when power supply is off. Built in input pull up circuit can make input pins be open, when not used. TTL level input Wide operating temperature range Ta = - 40 to + 85°C Function Table Inputs Output Control L L L H H L X Z : : : : : Q0 : High level Low level Immaterial High impedance Low to high transition Level of Q before the indicated steady state input conditions were established. L X CK D H L X X Output Q H L Q0 Z Pin Arrangement Output Control 1D 2D 3D 4D 5D 6D 7D 8D GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 VCC 1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q CK (Top...