Datasheet4U Logo Datasheet4U.com

HD74LVC138 - 3-to-8-line Decoder / Demultiplexer

General Description

The HD74LVC138 has three binary select inputs in a 16 pin package.

If the device is enabled these inputs determine which one of the eight normally high outputs will go low.

Two active low and one active high enables are provided to ease the cascading of decoders.

Key Features

  • VCC = 2.0 V to 5.5 V All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.0 V to 5.5 V) HD74LVC138 Function Table Inputs Enable G1 X X L H H H H H H H H H: L: X: G2A X H X L L L L L L L L G2B H X X L L L L L L L L Select C X X X L L L L H H H H B X X X L L H H L L H H A X X X L H L H L H L H Y0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LVC138 3-to-8-line Decoder / Demultiplexer Renesas
HD74LVC139 Dual 2-to-4-line Decoders / Demultiplexers Renesas
HD74LVC125A Quad. Bus Buffer Gates Renesas
HD74LVC14 Hex Schmitt-trigger Inverters Renesas
HD74LVC16240A 16-bit Buffers / Line Drivers Renesas

Other Datasheets by Hitachi Semiconductor (now Renesas)

Part Number Description
HD74LVC139 Dual 2-to-4-line Decoders / Demultiplexers
HD74LVC125A Quad. Bus Buffer Gates with 3-state Outputs
HD74LVC14 Hex Schmitt-trigger Inverters
HD74LVC16240A 16-bit Buffers / Line Drivers with 3-state Outputs
HD74LVC16241 16-bit Buffers / Line Drivers with 3-state Outputs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LVC138 3-to-8-line Decoder / Demultiplexer ADE-205-068B(Z) Rev.2 September 1995 Description The HD74LVC138 has three binary select inputs in a 16 pin package. If the device is enabled these inputs determine which one of the eight normally high outputs will go low. Two active low and one active high enables are provided to ease the cascading of decoders. Low voltage and high speed operation is suitable at the battery drive product (note type personal computer) and low power consumption extends the life of a battery for long time operation. Features • • • • • VCC = 2.0 V to 5.5 V All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C) High output current ±24 mA (@VCC = 3.