Hitachi HD74ALVC16334
HD74ALVC16334 is a 16-bit universal bus driver is designed for 2.3 V to 3.6 V VCC operation. The device operates in the transparent mode when the latch enable (LE) input is low. When LE is high, the A data is latched if the clock (CLK) input is held at a high or low logic level.| Part No. | HD74ALVC16334 |
|---|---|
| Datasheet | HD74ALVC16334 Download |
| Manufacturer |  Hitachi |
| Description | 16-bit Universal Bus Driver with 3-state Outputs |
| Buy | Stock & Price |
DESCRIPTION
This Data flow from A to Y is controlled by the output enable (OE ) input. If LE is high, the A data is stored in the latch/flip flop on the low to high transition of CLK. When OE is high, the outputs are in the high impedance state. To ensure the high impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current sinking capability of the driver.FEATURES
● VCC = 2.3 V to 3.6 V● Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C)
● Typical VOH undershoot > 2.0 V (@VCC = 3.3 V, Ta = 25°C)
● High output current ±24 mA (@V CC = 3.0 V) HD74ALVC16334 Function Table Inputs OE H L L L L L LE X L L H H H CLK X X X ↑ ↑ L or H A X L H L H X Z L H L H Y0 *1 Output Y H : High level L : Low level X : Immaterial Z : High impedance ↑ : Low to high transition Note: 1. Output level before the indicated steady state input conditions were established. 2 HD74ALVC16334 Pin Arrangement OE...
