Hitachi HD74BC574A
The HD74BC574A provides high drivability and operation equal to or better than high speed bipolar standard logic IC by using Bi-CMOS process. The device features low power dissipation that is about 1/5 of high speed bipolar logic IC, when the frequency is 10 MHz. The device has eight edge triger D type flip flops with three state outputs in a 20 pin package.| Part No. | HD74BC574A |
|---|---|
| Datasheet | HD74BC574A Download |
| Manufacturer |  Hitachi |
| Description | Octal D Type Flip Flops With 3 State Outputs |
| Buy | Stock & Price |
DESCRIPTION
Data at the D inputs meeting set up requirements, are transferred to the Q outputs on positive going transitions of the clock input. When the latch enable goes low, data at the D inputs will be retained at the outputs until latch enable returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the strage elements.FEATURES
●●
●
● Input/Output are at high impedance state when power supply is off. Built in input pull up circuit can make input pins be open, when not used. TTL level input Wide operating temperature range Ta = –40 to + 85°C HD74BC574A Function Table Inputs Output Control L L L H H L X Z : : : : : Q0 : High level Low level Immaterial High impedance Low to high transition Level of Q before the indicated steady state input conditions were established. L X CK D H L X X Output Q H L Q0 Z Pin Arrangement Output Control 1D 2D...
