HD74HC175 Datasheet | Hitachi Semiconductor

Description Information at the D inputs of the HD74HC175 is transferred to the Q and Q outputs on the positive going edge of the clock pulse. Both true and pliment outputs from each flip-flop are externally available. All four flip flops are controlled by a mon clock and a mon clear. Clearing is acplished by a negative pulse at the clear input. All four Q outputs are cleared to a logic low level and all four Q outputs to a logic high level. Features - - - - - High Speed Operation: tpd (Clock to Q) = 14 ns typ (CL = 50 p F) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 4 µA max (Ta = 25°C) Function Table Inputs Clear L H H H L Clock X D X H L H Outputs Q L H L no change Q H L H Pin Arrangement Clear 1 1Q 2 1Q 3 1D 4 2D 5 2Q 6 2Q 7 GND 8 (Top view) D CK Q CLR Q D Q CK CLR Q Q CLR CK Q D CLR Q CK Q D 16 VCC 15 4Q 14 4Q 13 4D 12 3D 11 3Q 10 3Q 9 Clock Logic Diagram 1D D CK Clock 2D CK CL D CK CK CL 3D D CK CK CL 4D D CK CK CL Clear 4Q Q 3Q 4Q Q 2Q Q 1Q 2Q Q 1Q 3Q DC Characteristics Ta = 25°C Item Input voltage Symbol VIH Ta = - 40 to +85°C Max - - - 0.5 1.35 1.8 - - - - - 0.1 0.1 0.1 0.33 0.33 ±1.0 40 µA µA I OL = 4 m A I OL = 5.2 m A Vin = VCC or GND Vin = VCC or GND, Iout = 0 µA V I OH = - 4 m A I OH = - 5.2 m A Vin = VIH or VIL I OL = 20 µA V Vin = VIH or VIL I OH = - 20 µA V Unit V Test Conditions VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 - 3.15 - 4.2 - - - - - - - - - - 0.5 1.5 3.15 4.2 - VIL 2.0 4.5 6.0 - 1.8 - 1.9 4.4 5.9 4.13 5.63 - -...