HD74HC76 Datasheet | Hitachi Semiconductor

Description Each flip-flop has independent J, K, preset, clear, and clock inputs and Q and Q outputs. This device is edge sensitive to the clock input and change state on the negative going transition of the clock pulse. Clear and preset are independent of the clock and acplished by a low logic level on the corresponding input. Features - - - - - High Speed Operation: tpd (Clock to Q) = 21 ns typ (CL = 50 p F) High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 µA max Low Quiescent Supply Current: ICC (static) = 2 µA max (Ta = 25°C) Function Table Inputs Preset L H L H H H H H H H Note: Clear H L L H H H H H H H L H Clock X X X J X X X L L H H X X X K X X X L H L H X X X Outputs Q H L H- Q L H H- 1 No change L H Toggle No change No change No change H L 1. Q and Q will remain HIGH as long as Preset and Clear are Low, but Q and Q are unpredictable, if Preset and Clear go HIGH simultaneously. Pin Arrangement 1CK 1 1PR 2 1CLR 3 1J 4 VCC 5 2CK 6 2PR 7 2CLR 8 (Top view) K CK J CLR Q PR Q J CK K PR Q CLR Q 16 1K 15 1Q 14 1Q 13 GND 12 2K 11 2Q 10 2Q 9 2J Block Diagram (1//2) PR CLR J K # CK CK # CK # CK CK CK CK CK # CK CK # CK DC Characteristics Ta = 25°C Item Input voltage Symbol VIH Ta = - 40 to +85°C Max - - - 0.5 1.35 1.8 - - - - - 0.1 0.1 0.1 0.33 0.33 ±1.0 20 µA µA I OL = 4 m A I OL = 5.2 m A Vin = VCC or GND Vin = VCC or GND, Iout = 0 µA V I OH = - 4 m A I OH = - 5.2 m A Vin = VIH or VIL I OL = 20 µA V Vin = VIH or VIL I OH = - 20 µA V Unit V Test Conditions VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 - 3.15 - 4.2 - - - - - - - - - - 0.5 1.5 3.15 4.2 - VIL 2.0 4.5...