HD74LV574A Datasheet | Hitachi Semiconductor

Description The HD74LV574A has eight edge-triggered D-type flip-flops with three-state outputs in a 20-pin package. Data at the D inputs meeting set up requirements, are transferred to the Q outputs on positive going transitions of the clock input. When the clock input goes low, data at the D inputs will be retained at the outputs until clock input returns high again. When a high logic level is applied to the output control input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. Low-voltage and high-speed operation is suitable for the battery-powered products (e.g., notebook puters), and the low-power consumption extends the battery life. Features - - - - - - VCC = 2.0 V to 5.5 V operation All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) Typical VOL ground bounce < 0.8 V (@VCC = 3.3 V, Ta = 25°C) Typical VOH undershoot > 2.3 V (@VCC = 3.3 V, Ta = 25°C) Output current ±8 m A (@VCC = 3.0 V to 3.6 V), ±16 m A (@VCC = 4.5 V to 5.5 V) Function Table Inputs OE L L L H Note: H: L: X: Z: ↑: ↓: Q0 : CLK ↑ ↑ ↓ X D H L X X Output Q H L Q0 Z High level Low level Immaterial High impedance Low to high transition High to low transition Output level before the indicated steady state input conditions were established Pin Arrangement OE 1 1D 2 2D 3 3D 4 4D 5 5D 6 6D 7 7D 8 8D 9 GND 10 20 VCC 19 1Q 18 2Q 17 3Q 16 4Q 15 5Q 14 6Q 13 7Q 12 8Q 11 CLK (Top view) Absolute Maximum Ratings Item Supply voltage range Input voltage range- 1 1, 2 Symbol VCC VI VO Ratings - 0.5 to 7.0 - 0.5 to 7.0 - 0.5 to VCC + 0.5 - 0.5 to 7.0 Unit V V V Conditions Output voltage range- Output: H or L VCC: Z or VCC: OFF Input clamp current Output clamp current Continuous output current Continuous current through VCC or GND Maximum power dissipation at Ta = 25°C (in still air)- 3 I IK I OK IO I CC or IGND PT - 20 ±50 ±35 ±70 835 757 m A m A m A m...