Datasheet4U Logo Datasheet4U.com

HMC608 - GaAs PHEMT MEDIUM POWER AMPLIFIER

General Description

The HMC608 is a high dynamic range GaAs PHEMT MMIC Medium Power Amplifier chip.

The amplifier has two modes of operation: high gain mode (Vpd pin shorted to ground); and low gain mode (Vpd pin left open).

Key Features

  • Output IP3: +33 dBm Saturated Power: +27.5 dBm @ 23% PAE Gain: 32 dB Supply: +5V @ 310 mA 50 Ohm Matched Input/Output 2.1 x 1.2 x 0.1 mm Die Size www. DataSheet4U. com Functional Diagram General.

📥 Download Datasheet

Datasheet Details

Part number HMC608
Manufacturer Hittite Microwave Corporation
File Size 409.39 KB
Description GaAs PHEMT MEDIUM POWER AMPLIFIER
Datasheet download datasheet HMC608 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC608LC4 GaAs pHEMT MMIC Analog Devices
HMC6000LP711E Millimeterwave Transmitter Analog Devices
HMC6001LP711E Millimeterwave Receiver Analog Devices
HMC600LP4 LOGARITHMIC DETECTOR/CONTROLLER Analog Devices
HMC600LP4E LOGARITHMIC DETECTOR/CONTROLLER Analog Devices

Other Datasheets by Hittite Microwave Corporation

Part Number Description
HMC609 GaAs PHEMT MMIC LOW NOISE AMPLIFIER
HMC610LP4 70 dB RMS POWER DETECTOR
HMC610LP4E 70 dB RMS POWER DETECTOR
HMC611 LOGARITHMIC DETECTOR / CONTROLLER
HMC611LP4 LOGARITHMIC DETECTOR/CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HMC608 v01.0707 GaAs PHEMT MEDIUM POWER AMPLIFIER, 9.5 - 11.5 GHz 3 LINEAR & POIWER AMPLIFIERS - CHIP Typical Applications The HMC608 is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios • Military End-Use Features Output IP3: +33 dBm Saturated Power: +27.5 dBm @ 23% PAE Gain: 32 dB Supply: +5V @ 310 mA 50 Ohm Matched Input/Output 2.1 x 1.2 x 0.1 mm Die Size www.DataSheet4U.com Functional Diagram General Description The HMC608 is a high dynamic range GaAs PHEMT MMIC Medium Power Amplifier chip. The amplifier has two modes of operation: high gain mode (Vpd pin shorted to ground); and low gain mode (Vpd pin left open). The electrical specifications in the table below are shown for the amplifier operating in high gain mode. Operating from 9.5 to 11.