Datasheet4U Logo Datasheet4U.com

HT42B532-x - USB to I2C Bridge IC

General Description

strings Integrated an internal 1.5kΩ pull-high resistor on D+ pin Serial Interface I2C Supports clock rate up to 400kHz Supports Master and Slave modes decided by AP command Supports maximum 62 bytes tra

Key Features

  • Operating Voltage (VDD): 3.3V~5.5V.
  • I2C pins Voltage (VDDIO): 1.8V~VDD (Less than VDD voltage).
  • Fully integrated internal 12MHz oscillator with 0.25% accuracy for all USB modes which requires no external components.
  • USB interface.
  • USB 2.0 Full Speed compatible.
  • Implements USB protocol composite device:.
  • Communication Device Class (CDC) for communications and configuration.
  • Human Inte.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HT400 Commercial Grade Lampholders Gilway Technical
HT4054 Li-ion Battery Charger HOTCHIP
HT4066 Over Voltage Protection HEROIC
HT4100F Relay Htv
HT4125 Buffer Translator GATE HEROIC

Other Datasheets by Holtek Semiconductor

Part Number Description
HT42B533-x USB to SPI Bridge IC
HT42B534-x USB to UART Bridge IC
HT42B564-x USB (HID) to UART Bridge IC
HT45B0003 Dual Line Power Line Data Transceiver
HT45B0005 Dual Line Power Line Data Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HT42B532-x USB to I 2C Bridge IC Features • Operating Voltage (VDD): 3.3V~5.5V • I2C pins Voltage (VDDIO): 1.8V~VDD (Less than VDD voltage) • Fully integrated internal 12MHz oscillator with 0.25% accuracy for all USB modes which requires no external components • USB interface ♦♦ USB 2.0 Full Speed compatible ♦♦ Implements USB protocol composite device: –– Communication Device Class (CDC) for communications and configuration. –– Human Interface Device (HID) for user configure USB VID, PID and device description strings ♦♦ Integrated an internal 1.